Valve Washing
From LEAP
| Washing LC Valve |
| Application Type | |
| Washing LC Valve | |
| Application ID | |
| Washing LC Valve | |
| Description | |
| Accessory Showcase |
Flushing or "washing" the syringe and valve can be essential. The selection of solvents and the number of washes can be of paramount importance. Although it may seem obvious, it is worth stating that washing with ineffective solvent(s) is useless. There are many factors that will influence the effectiveness of the rinse, strength and polarity among them, but there are no hard and fast rules that apply to every case, so the end-user/chemist must be sure to choose solvents that will get the job done. The valve material and syringe type can also influence carry-over.
Here are some options LEAP offers for washing the valve including the latest the DLW
Contents |
LEAP's Solutions to Washing Valve
Publications
Steps to Assess and Remedy Autosampler Carry-Over
Carry-Over Prevention and Abatement
LCGC Article about Autosampler Carryover
LCGC Article about Autosampler Carryover
Accessories for the PAL
Other Accessories for PAL Robots
LEAP strives to find total solutions for analytical lab automation by automating analytical processes for small and large molecules in extracted liquids, solids, and recently in human, animal and plant tissues. We provide the precise robotics and efficient sample prep required by modern measurement techniques such as MALDITOF mass spectroscopy. Our newest specialty customization of CTC Analytics’ PAL features small workstations that can perform complex liquid handling tasks including HPLC-Purification, SPE, filtration, weighing, heating and stirring. They can be configured as stand alone units or integrated for “just in time” sample prep for LC-MS or GC-MS analysis.
LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.
Contact LEAP
 Contact LEAP
For additional information about LEAP and the PAL Platform, please contact LEAP Technologies. |
Keywords: Flushing,washing,Liquid Chromatography, HPLC, syringe, valve, cleaning,selection of solvents, sticky moieties, number of washes, ineffective solvents, factors influencing, rinse, strength, polarity, among them, CTC, PAL , Autosampler, Robot, carryover, Change hardware-chemistry combination, carry over, carry-over, LEAP,Carryover is caused by the residual analyte from injection of the previous sample, LC-MS,reduce carryover, ultimate solution to reduce carry-over to the minimum,LEAP, bio-compatible valve,sample carryover,bioanalytical methods, sticky compounds, wash mixtures, wash sequence, LC Clean cycles, injection valve switching, macros
