Dilute and incubate sample prior to LC injection

From LEAP

The main goal is a “hands-off instrument” that executes a method that can dilute, mix and heat a sample before an injection.

Customer places 50ul of chilled sample (2-8 degrees Celsius) into vials and then adds 10ul of diluent to each vial. The vial must then be placed in the agitator to be heated at a temperature of 70 degrees Celsius for five minutes. After this incubation period, a 10ul sample will be taken from the vial and injected to the LC valve.

Project Ref: H1101

For other cost/time saving measures consider:

• LEAP offers multiple choices of Valve Self Wash Stations to aid in cleaning the valve [1]
• Dual Channel Serial Injection with Front Cut (M-002) using Analyst and ICC-CE [2]
• Dual Channel Parallel Injection (M-003) using Cycle Composer Software and Analyst [3]
• “Look Ahead”, sample prep before injection (M-004) using LEAP Shell Software [4]
• Dual Channel Parallel Injection (M-005) using LEAP Shell software [5]
• Summary of LC Multi Valve Applications [6]
• LEAP Shell Software and application for custom injections and scheduling [7]

---

Contact LEAP

For additional information about this technique please contact LEAP Technologies for detailed information

• Contact the LEAP office