Summary of LC Multi Valve Applications

From LEAP

	LC Multiple Valve Applications
	Application Type
	STANDARD AND SPECIAL
	Application ID
	Description
	Multiple Valve Applications for LC

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-001 [1]	Dual Channel Serial Injection Provides shorter cycle times by regenerating columns during next analytical run	Analyst with ICC-CE	* 6 port injection valve * 10 port Valve * Gradient Pump * Regeneration pump	* Saving of regeneration time(Back Cut) * Increase throughput at little cost * Control is all within Analyst * Compliance is not affected	* Can not do "Look Ahead" * Injections are not staggered * Peaks of interest must come of early * Columns may perform slightly differently on alternating samples	Yes

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-002 [2]	Dual Channel Serial Injection with Front Cut Provides shorter cycle times by regenerating columns during next analytical run and diverts the solvent front to waste	Analyst with ICC-CE	* Trio VS * Gradient Pump * Regeneration pump	* Saving of regeneration time(Back Cut) * Increase throughput at little cost * Control is all within Analyst * Compliance is not affected * Avoids contaminating MS inlet with early eluting compounds and solvent	* Can not do "Look Ahead" * Injections are not staggered * Peaks of interest must come of early * Columns may perform slightly differently on alternating samples	Yes

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-003	Dual Channel Parallel Injection Provides shorter cycle times by limiting the acquisition time to just the peaks of interest and regenerating columns during acquisition	Cycle Composer outside of Analyst	* DoubleStack valve *6 port injection valve *FWS in front of 6 port valve * Gradient Pump * Regeneration pump	* Saving of Front and Back Cut * Provides "Look Ahead" *Provides staggering of injections	* Requires matching sample lists in Cycle Composer and Analyst * Columns may perform slightly differently on alternating samples	No

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-005	Dual Channel Parallel Injection Provides minimum cycle times by limiting the acquisition time to just the peaks of interest and regenerating columns during acquisition	LEAP Shell	*DoubleStack valve *6 port injection valve *FWS in front of 6 port valve * Gradient Pump * Regeneration pump	*Integration with Analyst Software *Single Sample List *Provides staggering of injections *Multiplexes 2 separate LC systems into on MS	* Does not support 21CFR11 compliance *Requires pumps to be integrated with LEAP Shell	No

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-005	Dual Channel Parallel Injection Provides minimum cycle times by limiting the acquisition time to just the peaks of interest and regenerating columns during acquisition	LEAP Shell	*DoubleStack valve *6 port injection valve *FWS in front of 6 port valve * Gradient Pump * Regeneration pump	*Integration with Analyst Software *Single Sample List *Provides staggering of injections *Multiplexes 2 separate LC systems into on MS	* Does not support 21CFR11 compliance *Requires pumps to be integrated with LEAP Shell	No

For other cost/time saving measures consider:

• LEAP offers multiple choices of Valve Self Wash Stations to aid in cleaning the valve [3]
• Dual Channel Serial Injection (M-001) using Analyst and ICC-CE [4]
• Dual Channel Serial Injection with Front Cut (M-002) using Analyst and ICC-CE [5]
• Dual Channel Parallel Injection (M-003) using Cycle Composer Software and Analyst [6]
• “Look Ahead”, sample prep before injection (M-004) using LEAP Shell Software [7]
• Dual Channel Parallel Injection (M-005) using LEAP Shell software [8]
• LEAP Shell Software and application for custom injections and scheduling [9]

---

Contact LEAP

For additional information about this technique please contact LEAP Technologies for detailed information

• Contact the LEAP office