Valve Active Self Washing
From LEAP
(Difference between revisions)
| Line 1: | Line 1: | ||
{{LSApp | {{LSApp | ||
| - | |name = Valve Self | + | |name = Valve Active Self Washing |
|image = Active_Wash.png | |image = Active_Wash.png | ||
|type = Washing LC Valve | |type = Washing LC Valve | ||
| - | |id = Valve Self | + | |id = Valve Active Self Washing |
|description = Product Brochure | |description = Product Brochure | ||
}} | }} | ||
Revision as of 18:46, 20 February 2009
| Valve Active Self Washing |
| Application Type | |
| Washing LC Valve | |
| Application ID | |
| Valve Active Self Washing | |
| Description | |
| Product Brochure |
Contents |
Main Features
- Increased Throughput by simultaneous washing of injection syringe and injection valve
- 4 Wash Solvents can be used to wash the valve
- 9 Program Steps to wash with the 4 wash solvents in any order
- Software Interface SDS Launchpad
- Save/Load Methods
- Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad
- Contact Closure Triggered
- Compatible with all PAL Drivers
Performance Specifications
- Maximum flowrate 6mL/min in increments of 0.1mL/min
- Flowrate accuracy ± 10%
- Maximum dispensed volume 999mL
- Volumetric accuracy ± 5%
- Maximum pressure 50PSIG
- Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds
Requirements/Limitations
- Through-loop washes only for injecction loop volumes > 20uL
- Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min
- Use of Polypropylene compatible solvents
Screenshots
 Launch Pad Main Screen |
 Launch Pad Actions Screen |
 Launch Pad Load Method Screen |
 Launch Pad Log Screen |
