Dilutor

From LEAP

Revision as of 17:03, 10 June 2009 by Bpeat (Talk | contribs)
Jump to: navigation, search
Large Volume Dispensing
Application Type
  Accessory
Application ID
 
Description
  Accurate dispensing of solvents

Contents

Overview

There are multiple options on the PAL for delivery of volumes of solvent. Choice will depend on the requirements for delivery rate, delivery volume and accuracy.

Dilutor Accessory

Syringe pump volume range of 0.25 ml to 2.5ml delivery per 2.5 ml syringe cycle. (Optional dilutor syringe 1ml or 5 ml)
Flow Rate Range: 10μl/min - 300μl/min
Wetted parts: All liquids compatible with borosilicate glass, PTFE, Kel-F, FEP

Notes

  • Requires the addition of a custom macro or cycle for dispensing/diluting applications
  • Can be used with any of the PAL side port syringes or with the DISPENSE Tool
  • Is not supported by the on board PAL cycles
  • Requires an open AUX Port on the PAL
  • Requires PAL firmware 2.3 or higher



PRINT Function for Page

PDF of this page formatted for printing


Accessories for the PAL

Other Accessories for PAL Robots


This workstation accessory is based on the CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your LC or GC requirements. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible automation.

Contact LEAP

Contact the LEAP office

Personal tools