Purific Mini PAL
From LEAP
| Purific |
| Application Type | |
| SPECIAL | |
| Application ID | |
| Description | |
| Purific |
Contents |
Overview
The Purific™ is the latest fully automated turnkey system from LEAP Technologies for isolating target compounds from complex samples. It is compatible with a wide range of sample sizes and a wide range of HPLC columns.
PeakHarvester™ software is used for the preparation and realization of fractionation that brings together components from different manufacturers to create an integrated system. The collector's unit, the pumps, detectors, and the data acquisition are implemented as individual systems within a single software package. The central component is the PAL robot and all other devices can be either directly controlled by the PEAK HARVESTER or synchronized with injection and collection by contact closure and other analog.
Key Benefits:
- Powerful. Automation saves time without compromising purification quality. Get excellent sample recovery in less time with much less effort…
- User Friendly. The intuitive software interface makes setup and record keeping easy
- Versatile. Time-Based, Peak-Based, Mass-triggered collection
Applications
- Purification for biological or sensory evaluation (e.g. DMPKA)
- Replace older fraction collectors
- Pilot plant production
- Flash chromatography
The Purific combines LEAP’s strengths in LC sample preparation and purification to enhance productivity for analytical chemist.
- Dual head minimizes carryover and increases throughput
- Syringe only concept with no error prone Teflon tubing or transfer line
- Precise sample handling for dependable purification results
- All in one Injector-Collector, Compact Ergonomic Design features a small footprint that fits easily into a standard fume hood
- Anti-Static solvent Lines
- Automated switching procedures to clean and equilibrate column to increase throughput. Requires optional 10 port valve.
- Performance with Maximum Flexibility
- Keep your fractions cool, up to 4°C, with optional cool stack
Peak Harvester Control Software
Peak Harvester™ Developed by Leap Technologies is specifically designed to control each single step of the purification process.
It allows control of the LC pumps and detector, collects fractions in manual mode or in a choice of three programmable modes inside a predetermined collection window:
1) Time based mode using individual time slices per sample
2) Peak-Based mode using an analog signal e.g. UV or ELSD detector
3) Mass-triggered mode using an output signal of the MS for mass fractionation
- Color coded sample and fraction tracking lets you review and report an enormous amount of analytical data. It shows how many fractions have been collected and where they are located.
- Advanced software algorithms allow collecting the fractions correctly even for challenging peak shapes.
PeakHarvester™ software incorporates an open access interface that lets you walk up and log in your samples anytime. First simply log into the software using your ID followed by the format of the samples. Choose the method you want to use from a set of method options. After the collection process, review your results and retrieve the purified samples. PeakHarvester™ contains complete system administration tools for secure access management. All activities are stored in log files to ensure anytime system security reducing the possibility of errors and subsequent losses of potentially precious materials. PeakHarvester™ track barcode and accept sample list in different format like CSV or XML and interface easily with your LIMS systems with its XML report capability
- Specifically designed to control every step of the purification process.
- Quickly create and customize new methods.
- ”Smart” fraction collection on two signals simultaneously: Time and/or slope and/or threshold.
- Repeat injection can be collect on same fraction sites.
- Color coded sample and fraction tracking lets you review and report an enormous amount of analytical data.
- Open access interface lets you walk up and log in your samples anytime.
- Accept sample lists in different formats like CSV or XML.
- Bare code capable.
- Choice of collection pattern.
- Inject or re‐inject from and collect to any racks or stacks.
- Automatic end of the run after collection reduce solvent consumption.
- Detect and cancel signal noise.
- UV Wavelength settings integrated into the sample method.
- Remove collection rack and add samples during the run for 24/7 operation.
- Error handling and monitoring system.
THE HPLC WITH UNIQUE UV‐Vis DETECTOR
- Wide range of flow rates (0.01‐100ml/min); virtually all application needs are covered.
- Smooth, precise solvent flow and system pressure are maintained with a built‐in pressure unit .
- User friendly pump heads are self‐contained units that can be rapidly exchanged.
- Flow accuracy: ±1% of selected flow rate or ±0.05% of maximum flow rate, whichever is larger (0.1% for 5 mL heads).
- Flow reproducibility: ±0.1% of selected flow rate or ±0.05% of maximum flow rate, whichever is larger (0.1% for 5 ml heads).
- From 190 to 900nm with drift less than 1 mAU/hr the detector delivers a superb sensitivity and wide dynamic range.
- Routine maintenance is easy with front panel access. Thumb screws secure the lamps and flow cells making access and exchange tool free.
- Two independent channels analog‐to‐digital conversion for analog chromatographic detector (eg: ELSD, MS)
Extended Range Operation: The detector constantly samples both beams and records offset constants, even in analytical operation. Because of this, the detector has in memory the necessary constants to mathematically scale and seamlessly extend long path response with the short path response. During extended range operation, the long pathlength is constantly sampled, and as absorbance decreases there is a seamless switch back to dual beam operation in normal range.
Purific General Specifications
Screenshots
Mini Purific System |
PEAK Harvester Software |
Other Reference Material
Accessories for the PAL
Cooling &Heating Sample Storage
Active Self Wash for valve and syringe
Videos of PAL
LEAP's PAL Application Videos on YouTube
LEAP strives to find total solutions for analytical lab automation by automating analytical processes for small and large molecules in extracted liquids, solids, and recently in human, animal and plant tissues. We provide the precise robotics and efficient sample prep required by modern measurement techniques such as MALDITOF mass spectroscopy. Our newest specialty customization of CTC Analytics’ PAL features small workstations that can perform complex liquid handling tasks including HPLC-Purification, SPE, filtration, weighing, heating and stirring. They can be configured as stand alone units or integrated for “just in time” sample prep for LC-MS or GC-MS analysis.
LEAP provides automated workstation instrumentation solutions based on the LEAP CTC PAL X, Y, Z syringe only autosampler robot from LEAP Technologies. This extremely flexible, precise, and adaptable liquid handling robotic platform is available in a variety of lengths and options depending on the requirements of your sample preparation and injections for your UHPLC, LC or GC chromatography.LEAP offers full support and service for the PAL platform in addition to being able to write custom macros, cycles, and scheduling to your applications. Please contact LEAP Technologies on how we can help you get maximized throughput with flexible pipetting automation solutions.
Contact LEAP
 Contact LEAP
For additional information about LEAP and the PAL Platform, please contact LEAP Technologies. |
