Valve Self Washing II
From LEAP
(Difference between revisions)
| Line 35: | Line 35: | ||
* Use of Polypropylene compatible solvents | * Use of Polypropylene compatible solvents | ||
| - | == Screenshots == | + | === Screenshots === |
<gallery> | <gallery> | ||
| Line 65: | Line 65: | ||
<br><br> | <br><br> | ||
[[Category:Accessories]] | [[Category:Accessories]] | ||
| - | [[Valve Washing]] | + | [[Category:Valve Washing]] |
Revision as of 01:22, 29 April 2009
| Valve Self-Washing System – II |
| Application Type | |
| Washing LC Valve | |
| Application ID | |
| Valve Self-Washing System – II | |
| Description | |
| Accessory Showcase |
www.leaptec.com
www.leapwiki.com
www.leapwiki.com
Contents |
Main Features
- Increased Throughput by simultaneous washing of injection syringe and injection valve
- 4 Wash Solvents can be used to wash the valve
- 9 Program Steps to wash with the 4 wash solvents in any order
- Software Interface SDS Launchpad
- Save/Load Methods
- Easy Verification of Downloaded Method via the “Dashboard” feature in SDS Launchpad
- Contact Closure Triggered
- Runs stored wash routine
- Washes independent of injection syringe
- Can increase syringe life
- Compatible with all PAL Drivers
Performance Specifications
- Maximum flowrate 6mL/min in increments of 0.1mL/min
- Flowrate accuracy ± 10%
- Maximum dispensed volume 999mL
- Volumetric accuracy ± 5%
- Maximum pressure 50PSIG
- Typical wash time for 2 solvents (1mL each) @ 6mL/min is 45 seconds
Requirements/Limitations
- Through-loop washes only for injection loop volumes > 20uL
- Lower dispense speeds needed for more viscous solvents, e.g., i-Propanol @ 3-4mL/min
- Use of Polypropylene compatible solvents
Screenshots
 Launch Pad Main Screen |
 Launch Pad Actions Screen |
 Launch Pad Load Method Screen |
 Launch Pad Log Screen |
Other Reference material
PRINT Function for Page
www.leaptec.com
www.leapwiki.com
www.leapwiki.com
Contact LEAP
For additional information about this technique please contact LEAP Technologies for detailed information
