Using Dilutor for Washing
From LEAP
(Difference between revisions)
Line 7: | Line 7: | ||
}} | }} | ||
+ | == Main Features === | ||
+ | * Increased Throughput by simultaneous flushing of injection syringe and injection valve | ||
+ | * Compatible with any HTS PAL or CombiPAL equipped with a side slitted Injection unit | ||
- | + | === Performance Specifications === | |
* A large volume of solvent is passed directly into and through the syringe and has been shown to significantly improve rinsing results. | * A large volume of solvent is passed directly into and through the syringe and has been shown to significantly improve rinsing results. | ||
- | * | + | === Notes === |
+ | * Requires the addition of a custom macro or cycle to run the appropriate macro | ||
+ | * Limited to either a 20 or 80uL sample syringe size with a side port connection | ||
+ | * Requires an open AUX Port on the PAL | ||
+ | * Requires PAL firmware 2.3 or higher | ||
+ | * It can not be used on standalone PAL instruments |
Revision as of 15:30, 25 February 2009
Dilutor | |
Application Type | |
SPECIAL | |
Application ID | |
Dilutor | |
Description | |
Accessory Showcase |
Main Features =
- Increased Throughput by simultaneous flushing of injection syringe and injection valve
- Compatible with any HTS PAL or CombiPAL equipped with a side slitted Injection unit
Performance Specifications
- A large volume of solvent is passed directly into and through the syringe and has been shown to significantly improve rinsing results.
Notes
- Requires the addition of a custom macro or cycle to run the appropriate macro
- Limited to either a 20 or 80uL sample syringe size with a side port connection
- Requires an open AUX Port on the PAL
- Requires PAL firmware 2.3 or higher
- It can not be used on standalone PAL instruments