Sandbox

(Difference between revisions)

Revision as of 21:38, 28 April 2009

	Testing of Wiki page location
	Application Type
	WIKI TEST
	Application ID
	ABC
	Description
	Wiki Testing Page for LEAP

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-001	Dual Channel Serial Injection Provides shorter cycle times by regenerating columns during next analytical run	Analyst with ICC-CE	* 6 port injection valve * 10 port Valve * Gradient Pump * Regeneration pump	* Saving of regeneration time(Back Cut) * Increase throughput at little cost * Control is all within Analyst * Compliance is not affected	* Can not do "Look Ahead" * Injections are not staggered * Peaks of interest must come of early * Columns may perform slightly differently on alternating samples	Yes

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-002	Dual Channel Serial Injection with Front Cut Provides shorter cycle times by regenerating columns during next analytical run and diverts the solvent front to waste	Analyst with ICC-CE	* Trio VS* Gradient Pump * Regeneration pump	* Saving of regeneration time(Back Cut) * Increase throughput at little cost * Control is all within Analyst * Compliance is not affected * Avoids contaminating MS inlet with early eluting compounds and colvent	* Can not do "Look Ahead" * Injections are not staggered * Peaks of interest must come of early * Columns may perform slightly differently on alternating samples	Yes

Code	Application	Control SW	Key Hardware	Key Benefits	Restrictions	GLP
M-002	Dual Channel Serial Injection with Front Cut Provides shorter cycle times by regenerating columns during next analytical run and diverts the solvent front to waste	Analyst with ICC-CE	* Trio VS* Gradient Pump * Regeneration pump	* Saving of regeneration time(Back Cut) * Increase throughput at little cost * Control is all within Analyst * Compliance is not affected * Avoids contaminating MS inlet with early eluting compounds and colvent	* Can not do "Look Ahead" * Injections are not staggered * Peaks of interest must come of early * Columns may perform slightly differently on alternating samples	Yes

www.leaptec.com
www.leapwiki.com

For additional information about this technique please contact LEAP Technologies for detailed information

@@ Line 47: / Line 47: @@
 |}
+{| cellpadding="6" style="border:1px solid darkgray;"
+|- align=left
+!width="20"|Code
+!width="195"|Application
+!width="85"|Control SW
+!width="140"|Key Hardware
+!width="205"|Key Benefits
+!width="235"|Restrictions
+!width="15"|GLP
+|- align=left
+| style="border:1px solid blue;"|'''M-002'''
+| style="border:1px solid blue;"|'''Dual Channel Serial Injection with Front Cut'''<br><br>Provides shorter cycle times by regenerating columns during next analytical run and diverts the solvent front to waste
+| style="border:1px solid blue;"|Analyst with ICC-CE
+| style="border:1px solid blue;"|* Trio VS* Gradient Pump<br>* Regeneration pump
+| style="border:1px solid blue;"|* Saving of regeneration time(Back Cut)<br>* Increase throughput at little cost<br> * Control is all within Analyst<br>* Compliance is not affected <br>* Avoids contaminating MS inlet with early eluting compounds and colvent
+| style="border:1px solid blue;"|* Can not do "Look Ahead"<br>* Injections are not staggered<br>* Peaks of interest must come of early<br>* Columns may perform slightly differently on alternating samples
+| style="border:1px solid blue;"|Yes
+|}