LC Column Switching and Regeneration
From LEAP
(Difference between revisions)
Line 15: | Line 15: | ||
- | [[Image:Valve_Drawing_ColRegen.png]] | + | [[Image:Valve_Drawing_ColRegen.png|frame|Valve Drawing]] |
- | |||
- | + | [[Image:key_Benefits2.png]] | |
- | + | [[Image:Restrictions.png]] | |
- | + | ||
- | + | ||
- | + |
Revision as of 15:25, 4 February 2009
LC Column Switching & Regeneration | |
Application Type | |
High Throughput | |
Application ID | |
LC1001 | |
Description | |
LC Column Switching & Regeneration. |
Overview
This configuration allows the regeneration of one of the analytical columns while the other one is engaged - giving greater efficiency and higher throughput.
There are 2 pumps needed, one for the gradient run and another (higher flow rate and isocratic) for regeneration. This configuration requires a 6 port valve for sample loading and a 10 port valve for column switching.